Define the requirement
Choose wall type and thickness, then enter net wall area or an exact block quantity.
Planning tool
Plan your AAC materials
Estimate AAC blocks, full pallets, materials and accessories using HENNER’s standard consumption factors.
Start here
Project Requirement
Choose your wall specification, then enter an area or exact block quantity.
Calculation Mode
Options follow the selected wall type.
Exact quantity; no extra wastage.
Your estimate
Ready when you are
Enter your project requirement and select Calculate.
Estimated supply requirement
Calculation result
Inputs changed — calculate again to update this estimate.
- Wall Type
- Block Thickness
- Wall Area
- Estimated Block Qty
- Wastage / Allowance
- Suggest Pallets
- Supplied Blocks
- Supplied Coverage
Material Requirement
- Thin Bed Adhesive
- bags
- Fibreglass Mesh
- rolls
- Skim Coat Base — 3mm
- bags
- Skim Coat Finish — 1mm
- bags
- Render — 10mm
- bags
- FB2 Tie
- pcs
Planning estimate only. Calculated quantities are based on HENNER's standard material consumption factors and the project information entered above. Actual requirements may vary according to wall configuration, site conditions, workmanship, installation method and material wastage. Please consult HENNER for project-specific requirements and final quantities.
Reference data
Current pallet configuration
| Thickness | Blocks / pallet | Coverage / pallet | Volume / pallet |
|---|---|---|---|
| 50 mm | 360 | 43.2 m² | 2.2 m³ |
| 75 mm | 240 | 28.8 m² | 2.2 m³ |
| 100 mm | 180 | 21.6 m² | 2.2 m³ |
| 125 mm | 144 | 17.3 m² | 2.2 m³ |
| 150 mm | 120 | 14.4 m² | 2.2 m³ |
| 175 mm | 96 | 11.5 m² | 2 m³ |
| 200 mm | 84 | 10.1 m² | 2 m³ |
| 225 mm | 72 | 8.6 m² | 1.9 m³ |
| 250 mm | 72 | 8.6 m² | 2.2 m³ |
| 300 mm | 60 | 7.2 m² | 2.2 m³ |
How it works
Review materials
See AAC blocks, full pallets and accessory quantities from one area basis.
Send the calculation
Carry the validated estimate into your quotation request.
Need technical assistance?
Speak with HENNER about product suitability, detailing and project-specific requirements.
Contact our technical team